Brass Round Bars

Brass Round Bars:

Brass Round Bars:

Brass is a non-ferrous red metal, which is an alloy of zinc and copper. A Brass Round Bar is a highly demanded product all over the globe. These bars are highly resistant to corrosion and erosion.

Brass Round Bars which may also be prone to ‘knife line attack’ in the heat – affected zones of welds, very close to the fusion zone where the carbo – nitrides have re – dissolved in the solid steel matrix. The weldability of Brass Square Bars can be assumed to be similar, where neither of the grades can be expected to weld ‘easier’ or ‘better’ than – the – other.

Grade:

Alloy 260: Also known as cartridge brass, Alloy 260 demonstrates good cold working properties. It is suitable for use in ammunitions, automobiles, fasteners, and hardware.

Alloy 272:This alloy—also referred to as yellow brass—consists of 33% zinc. It is typically used in industrial and architectural applications.

Alloy 330:Brass alloy 330 is suitable for application where high machinability is critical. It contains a low lead content sufficient for cold-working and is commonly used to produce pipes.

Alloy 353:Alloy 353 (also referred to as clock brass) is often used to fabricate precision components, such as clock and watch parts, because of its excellent machinability.

Alloy 360: Also known as free cutting brass, this alloy is the most common type of brass. It exhibits excellent machinability and formability, as well as suitability for soldering and brazing operations. It commonly finds application in the manufacture of hardware components, fittings, valves, and fasteners.

Alloy 385:  Also known as architectural bronze this alloy can be used for construction & architectural applications. Alloy 385 is available in a wide variety of extruded & drawn shapes such as angles, channels, square tube, hand rail moulding & more.

Alloy C48200 – C48500:Leaded naval brass meanto for machining. Typically available in rounds.

Alloy 464 : Alloy 464 (or naval brass) is known for its excellent resistance to corrosion from seawater across a wide range of temperatures. Additionally, it demonstrates suitability for hot forming and hot forming, as well as drawing, bending, heading, soldering, brazing, and welding.

Shapes:

Sheet :  Plate, Coil, Shim, Foil, Square sheet, rectangulare sheet, Square plate, rectangulare plate, Circle, Plate Cut, Sheet Cut, Flat, Patta, Ring, chquered plate, chquered sheet, Slit Coil.

round bar :  square bar, hex bar, Bush, Wire.

Pipe: Round Pipe, Square Pipe, Hollow Pipe, Rectuangular Pipe, Bush, box pipe, Tube.

Pipes Fittings: Fastners.

Angle : Chanel, Beam, Flat.